|
INSAPFLEX |
|
STAINLESS STEEL HOSE (SINGLE BRAID) |
|
|
 |
| APPLICATION | Diluted or concentrated acid, alkalies, liquid ammonia, nitrogen, hydraulic oil, steam, air, water. Suitable for high pressure and high temperature and high temperature application |
| CONSTRUCTION | Inner corrugation out of SS 321 / 316/316L and outer wire braiding out of SS 304 |
| WORKING PRESSURE | Working pressure given are for fluid temperature up to 20 C. Burst pressure are generally four times working pressure |
| TESTING | All hose assemblies are hydraulically tested before dispatch. Test and Material Certificates will be supplied when specially requested. |
| TEST PRESSURES | The maximum test pressure shown on the above chart must not be exceeded or distortion can occur to the convoluted from of the hose. Provided this measure is not exceeded, hoses are subjected to a test of one-and-a-half times the customers stated working pressure. |
| MINIMUM BEND RADII | Dimensions given are for flexing applications. For static conditions two-thirds of this dimension should be used. |
| FITTINGS | A full range of flanges, screwed connectors, tube ends and almost any special fittings can be welded to this hose by argon arc process. Details of standard fittings on page 34. |
| TEMPERATURE RANGE | -196C to +600C |
| DIMENSION ID/OD TOLERANCE | + (0r) - 1.0mm |
