| APPLICATION |
Diluted or concentrated acid, alkalies, liquid
ammonia, nitrogen, hydraulic oil, steam, air, water. Suitable for high
pressure and high temperature and high temperature application. |
| CONSTRUCTION |
Inner corrugation out of SS 321 /
316 / 316L and outer
wire braiding out of SS 304. |
| WORKING PRESSURE |
Working pressure given are for fluid temperatures
up to 20 C. Burst pressure are generally four times working
pressure. |
| TESTING |
All hoses assemblies are hydraulically tested
before dispatch. Test and Material Certificates will be supplied when
specially requested. |
| TEST PRESSURES |
The maximum test pressure shown on the above chart
must not be exceeded or distortion can occur to the convoluted from of the
hose. Provided this measure is not exceeded, hoses are subjected to a test
of one-and-a-half times the customers stated working pressure. |
| MINIMUM BEND RADII |
Dimensions given are for flexing applications. For
static conditions two-thirds of this dimension should be used. |
| FITTINGS |
A full range of flanges, screwed connectors, tube
ends and almost any special fitting can be welded to this hose by argon
arc process. Details of standard fittings on page 34. |
| TEMPERATURE RANGE |
-196C to +600C |
| DIMENSION ID/OD TOLERANCE |
: + (0r) - 1.0mm |
